SMC glass fiber reinforced plastic water tank is made up of standard water tank plates and assembled. There are three standard versions of water tank plates: 1000 * 1000, 1000 * 500, 500 * 500, three types. The board and the board are connected by screws, and the middle clip seals the water-proof glue. Bar, supplemented with other accessories, can be combined into a high-quality water tank of any size. The water tank uses food-grade resin raw materials, has no pollution to water quality, and can meet the requirements of the national standard "Sanitary Standard for Drinking Water" (GB5794-2006).
FRP water tank has the advantages of convenient installation, flexible size, high strength, corrosion resistance, low price, beautiful appearance, and easy cleaning. It has been widely used in factories, hotels, residences, enterprises, and other industries for domestic and fire protection water.
1: Please determine the length, width, and height of the water tank according to the size of the site space, and the size is a half meter. For example 1.0 meters, 1.5 meters, 2.0 meters.
2: Generally speaking, the lower the height of the water tank under the same volume, the length and width dimensions are approximately the same, the lower the cost of the water tank.
3: In principle, the height of the water tank does not exceed 4 meters. If it must be exceeded, it must be specially designed by the manufacturer.
4: Oversized water tanks need to be delivered in parts. On-site installation, according to the installation location, calculate the installation cost separately.
5: The water tank board is a special embossed plate design, and the board thickness is reasonably distributed according to hydraulic principles. Therefore, the water tank board cannot use mm to indicate the board thickness, but use weight to distinguish, and mark #.
6: Can also be provided without internal design, the internal space of the water tank can be fully utilized to meet the needs of customers placing equipment.